NVIS.DEVNIGHT VISION, UNDERSTOOD
Home / NVIS compatibility
NVIS fundamentals

NVIS Compatibility: Displays, Lighting & Goggles

A night vision imaging system changes how an operator sees the surrounding scene. Displays, instrument lighting, nearby indicators, and reflected light must support that task without creating an unsuitable lighting environment for the specified equipment. A useful NVIS design begins with the complete viewing arrangement.

Separate the measurements

The letters NVIS here mean Night Vision Imaging System. This guide concerns optical and display technology, rather than the unrelated radio-propagation use of the same acronym. Dim, green, and NVIS compatible answer different questions.

RequirementQuestion it answersWhat it cannot establish alone
LuminanceHow much visible output reaches the viewer in the specified direction?Whether the spectrum suits the goggles
ChromaticityWhere does visible color fall in the specified coordinate system?Near-infrared emission or total radiance
NVIS radianceHow does emitted spectrum interact with the specified NVIS response?Daylight readability or installation approval
ReadabilityCan the operator identify required information under stated conditions?Completion of all spectral and environmental tests

Two sources can have similar visible colors while producing different spectral distributions. A colorimeter or CIE plot supports color development, but does not replace the spectral evidence needed for an NVIS requirement.

Type, Class, and color are different properties

In MIL-STD-3009 terminology, Type concerns NVIS image presentation and Class concerns spectral compatibility characteristics. These designations are separate from image-intensifier generation and lighting color.

Class A and Class B involve different objective-filter characteristics. Class C includes a controlled green transmission feature relevant to certain head-up display arrangements. The complete applicable requirements govern; a nominal wavelength label is insufficient for specifying goggles or a display filter.

NVIS Green B is a chromaticity designation. Its name does not establish Class B compatibility. Passing a color-region check leaves the applicable radiance, luminance, and other requirements to be evaluated separately.

Define the viewing task explicitly

An operator may read a nearby display using unaided vision while looking beneath or around the goggles. Another application may require viewing a display through the optics. These arrangements create different questions about focus, distance, legibility, and emitted light.

Type I direct-view NVIS describes image presentation within the NVIS architecture. It does not, by itself, mean that an LCD should be read directly through the goggles.

  • Identify the goggle model, configuration, and required Type/Class.
  • Describe the viewing position and information-reading task.
  • Separate day, night, and transition conditions.
  • Include displayed colors, symbols, controls, indicators, leakage, and reflections.
  • Identify the exact assembly and evidence required for acceptance.

Evaluate the assembly

MIL-STD-3009 addresses NVIS-specific emission characteristics of aircraft lighting and display equipment. General lighting needs and environmental requirements must also be defined. A filter or backlight can contribute to a successful design, but the assembled display and installation create the actual optical paths.

Use development measurements to locate problems, then retain acceptance evidence for the agreed configuration. Record changes to filters, LEDs, cover glass, bonding, firmware, and controls so later results remain traceable.

Common questions

Does turning down brightness make a display NVIS compatible?

It may reduce emitted energy, but compatibility also depends on spectrum, required color, usable output, the receiver, and applicable test conditions.

Is an NVIS Green B point inside the color boundary sufficient?

No. It is a color result. Spectral radiance and the remaining applicable requirements need separate evidence.

Does a compatible display approve an aircraft installation?

No. Equipment results and installation evaluations have different scopes. The FAA publishes separate daylight, unaided, cockpit-compatibility, and flight-evaluation resources.

Sources & further reading

Use the current manufacturer documents and the issue of each standard specified by your program. The checklists here are engineering guidance, not quoted standard requirements.

FROM REQUIREMENTS TO A WORKING SYSTEM

Bring the optical interfaces into the conversation.

Goggles, lighting, filters, sensors, and displays need to work together. Discuss the application with FPD.DEV or introduce a customer who needs display and optical integration support.